Flat Roofing Materials

It’s a fact that your roof is one of the most important parts of your house and is the one thing that provides the building structure, the building occupants and the building contents with protection from the elements. Many roofs are in a state of disrepair but homeowners ignore this until the roof gets worse or until the weather gets worse. With regular maintenance and the early identification and fixing of any problems you can usually avoid the big problems that have equally big price tags attached to them. Regular maintenance in this way will also help extend the life of your roof.

Selecting flat roofing materials.

Flat roofs have extra difficulties associated with them. Because they do not slope rainwater does not automatically run down the roof and drain off. It is absolutely vital that flat roofing materials are as water resistant and water tight as possible to prevent serious damage to the roof itself and to the rest of the building and it’s contents. New types of flat roofing material are being used and while these offer more in the way of protection they are also more expensive as a general rule. There are still three main types of flat roofing materials that are used on a regular basis on new and older houses.

Built up flat roofing materials.

Built up roofing is basically just that. Built up roofing consists of laying down several layers of tar and water resistant materials and then covered with gravel. This is quite an old technique but the introduction of new waterproof materials has seen the strength and durability of this technique increase. The gravel acts as a good fire resistant layer and can be made to look very attractive. It is usually the cheapest of the flat roofing materials available, however, it is very heavy and may require strengthening of the joists. It is also impractical to use on residential houses that are being lived in because it smells terribly. The gravel itself can clog gutters and other vital aspects of water drainage.

Modified Bitumen flat roofing.

Modified bitumen is another stalwart in the world of flat roofing materials. Once upon a time it was necessary to use torchdown techniques that involved burning the roll of material onto the roof, however it is now possible to get adhesive varieties, thus cutting out the potential fire hazard that is sometimes associated. The mineral surface that is used to create modified bitumen can be created in light colors, effectively reflecting the heat and sun. This will cut down on your energy bills during the summer months, and it can even be installed by any avid (and competent) do it yourself fanatic.

Rubber membrane.

Rubber membrane is another method of coating your flat roof. As far as flat roofing materials go it is durable and resistant to general wear and tear. Leaks are easy to find and repair, but the cost is really quite high. The standard black rubber does not reflect heat and paying for a lighter membrane will cost you more, however, it is quick to fit and will cause little disruption to your house life during the process.

This article was submitted by New America Construction, a professional roofing contractor in New Jersey.



Mold Disinfectant

Most of us have heard of mold, but don’t really know much about it. Until it makes it sick, or we notice that something in our refrigerator or cupboard has grown a layer of green fuzz, we don’t really think about it. The fact is mold is a living fungus that exists all around us. It grows in our houses, often unseen, and we should really have a good mold disinfectant on hand.

Mold spreads easily because it sends out tiny spores that the air carries everywhere. The spores are invisible and their goal in life is to be warm, damp, and find food. The trouble is many common materials in our homes are what give them life. Things we take for granted as part of our daily lives such as clothing, carpet, wallpaper, ceiling tiles, dust, and books, when existing in the right temperature and humidity cause mold to flourish and spread unless treated by a mold disinfectant.

Not everyone experiences symptoms when exposed to mold, just as not everyone reacts to pollen in the air during the spring and summer, or cat dander all of the time. Even if this is true in your case, it doesn’t mean that it’s healthy to be breathing mold. Some possible ill-effects are runny nose, itching or burning eyes, cough, asthma, or other respiratory problems. Go online or contact your local health department to find get rid of mold in my house free information.

Taking Action

Since you usually can’t see mold, your first clue that you may have it is a damp, musty, or mildew like odor in a room or particular area of your home. Learn more about detecting mold from reading up on it in get rid of mold in my house free information literature or website. Mold often grows after you’ve had some sort of water problem. Even something like an overflowing toilet or leaky washing machine can attract mold spores. Since mold grows fast and can invade at anytime, you should have a mold disinfectant available (#761 Industrial Germicidal Cleaner). This is especially true if you live in a damp or humid climate, use a humidifier, and daily temperatures range between 40 and 100 degrees Fahrenheit.

There are definite steps you should take when you find mold, as you don’t’ want it to be a permanent houseguest. First of all read over your get rid of mold in my house free information. It’s important that you eradicate every sign of mold as it will just keep spreading if you don’t.

Before you attack the mold and handle any chemicals, be sure to protect yourself from breathing in the spores or making skin contact. You should wear eye goggles, a mask over your nose and mouth, and rubber or latex gloves. Your clothing should be made from a washable fabric, as you’ll need to put them through the washer and dryer as soon as you’ve finished your mold disinfectant project.

If your home has many of the conditions that make it extra susceptible to mold, vacuum carpets and clean hard surfaced floors regularly. Be especially vigilant in damp areas. Any time you have a leak, repair the problem that caused it right away. Use your mold disinfectant since the spores are so difficult to detect.


Bathrooms attract mold because they are damp, in the ideal temperature range, and there are lots of materials in there for mold to feast on. You should regularly use a mold disinfectant when you do your routine cleaning (#9841 Fullsan Quaternary Germicidal Cleaner). In fact it’s a great idea to create a bathroom cleaning check sheet to ensure that you don’t miss any possible mold growing hotspots. Include such things as:

·    Scrub the shower curtain with mold disinfectant
·    Frequently wash all towels, bath mats, and area rugs
·    Thoroughly clean sinks, tubs, showers, and toilets If your bathroom is carpeted, vacuum (they are best with hard surfaced flooring)
·    Wash uncarpeted flooring

When you work with your bathroom cleaning check sheet each time, you won’t accidentally forget to do one of these critical tasks.

If you have mold on your deck, sidings, or roof, use a pressure washing product (# 574 Pressure Washer Mold and Mildew Cleaner).

Mold is something you definitely don’t want to live with. A little diligence and good cleaning habits will help you avoid this annoying problem. To learn more about it, read more get rid of mold in my house free information. Also, don’t forget to make up your bathroom cleaning check sheet.

This article was submitted to the website by Cardinal Movers, located in New Jersey.

Walk In Showers: Advantages And Uses

Walk in showers are becoming more and more popular in recent years for their contemporary look and feel, as well as their unique convenience and safety precautions.

Walk in showers have been popular for quite a while in certain commercial applications, such as at gyms. A walk in shower allows individuals to quickly duck into the shower after working out, and rinse the sweat and dirt off.

Walk in showers have recently become a popular trend in home bathroom designs, especially for senior citizens and elderly individuals. They offer a unique brand of convenience, flexibility, and style.  They also offer safety for someone who is disabled and has trouble walking.

Walk in showers are very convenient as they allow you to quickly and easily duck in the shower for a quick shower, without having to mess with a stuck shower curtain, etc. They are what you might call a minimal, integrated design.

As far as flexibility is concerned, walk in showers are about as flexible as showers can get. You can create a walk in shower anywhere in your bathroom if you get the right bathroom remodeler or contractor.  You can also get the correct plumbing too. You can put it in a corner, or even in the middle of the room if you wanted.

Once you do decide that a walk in shower is what you want, you have some great design options. You can create a wet room, which is basically just a corner of your bathroom surrounded by some glass panels to contain the water. This gives you a very flexible design, allowing you to make the shower the right size to fit your specific needs. For example, you could easily make a handicapped accessible shower this way.

There is really no limit to the designs you can create for your walk in shower. You can buy the glass panels separately and create your own unique design. If you can come up with a design, you can probably create it – It’s all up to you!


Considerations for purchase of Double Glazed Windows and Doors

When we start discussing homes, we are more interested and excited talking about what we have done to our homes. The way we have decorated and maintained the elegance and beauty in our home.

We love each and every corner of our dream house and want to talk more and more about it. It gives a fantastic and exuberant feeling talking about the place where we live and spend most of our time. But when it comes to redesigning or remodelling our home, we start to think about what will be best to give it the most attractive and different look.

The most important part is windows and doors, which helps drastically in changing the look of the house. At present, one of the most demanded products are glazing windows and doors. They are extremely efficient, attractive and contribute to the security of the home. But before buying any double glazing we should always do extensive research on the marketplace and keep these things in mind.
Double glazing is very efficient in cutting your heat loss to half. They are highly efficient, in general terms double glazing means two panes of glass placed several millimetres apart in order to form the window having air trapped within. Double glazing also decreases the noise level from outside and eliminates internal condensation.

Before buying double glazing, one should research the marketplace thoroughly for the best deal. Request quotes from as many different suppliers as possible and review the different ranges of double glazed windows and doors.   One should compare the price difference from a quality perspective, maintenance and services.

What one should always keep in mind when looking for a double glazing replacement window company:

1) What services they are offering.

2) Are they authorised to sell double glazed products.

3) Do they provide maintenance and installation.

5) A satisfied customer list with their phone numbers.

6) Ensure that they are a member of the Fenestration Self-Assessment Scheme (FENSA), this will mean that they will comply with all relevant UK building regulations.

When you are discussing payment terms and conditions, you must be clear on how payment is to be taken, either as one payment or on instalment. Be sure about everything you are doing. Consult previous customers and take feedback about payment issues.

So if you are interested in converting your windows and doors to double glazing, keep these points in mind and get the best from the market.

Free Roofing Estimate

With regular maintenance and some care most roofs will have a considerable life of 15 years or more, but regardless of how careful you are in looking after your roof you will inevitably need to have a new roof fitted one day and it can be a large outlay of money, however, your roof provides an invaluable service to you, the house itself and the contents within it so it is important that you do not compromise the quality of your new roof by taking the cheapest quote around. The key is to shop around as much as possible. Get a free roofing estimate from numerous different companies and make sure that you are comparing them on a like for like basis to get the best idea of which quote suits your needs.

Preparation before you request a free roofing estimate

It is always important to do your research, especially if you know little or nothing about roofing. When you request a free roofing estimate you want to be able to do so with confidence that you know what you are asking for. Searching the Internet will usually yield impressive results for your research and you can always ring a roofing contractor to ask a few questions; they will normally be glad to help in the hope they will be invited to work on the project. Try to research as much as possible regarding the potential materials and some basic building techniques that may be employed.

Picking the companies to give you a free roofing estimate

Word of mouth is one of the most effective ways of finding good roofing contractors. This way you will already know that the company in question has done good work on somebody else’s house. Look around for houses that are having their roof done and ask the homeowner what they think of the work; if the work has been good they won’t mind telling you.

Compare on a like for like basis

When you have a list of quotes for anything, whether insurance or for your roofing work it is vital that you compare them on a like for like basis. This is why it is also important that you research the product you are looking to buy before you begin your hunt for the best free roofing estimate you can find. If you have a quote from one company offering you two layers of slate shingles and an offer from another company only offering one layer it is immediately obvious that the latter is going to work out cheaper because they have lower cost of materials and lower labor costs.

You should always make sure that you clearly indicate what you want a quote for and this way whenever you receive a free roofing estimate you will be able to quickly ascertain how it stands up to competition from other companies. A free roofing estimate is invaluable in your search for the best value roofing contractor but only when used properly, otherwise it can do more harm than good.

Roofing Basics

Roofing is something that every home owner needs to know something about, after all it is about the roof over your head and is directly linked to the quality of life in your house. Looking for anew roof for a house can be an exhausting work, the research for the materials and the negotiations with the professionals, even before any material has been purchased and any work begun you may find yourself giving up the idea, just for the sheer scale of the project and what it involves.

If you are looking to get a new roof on your house, you will have to think about the way you are going to get the work done, many people think that they can do the work themselves only to later discover that they cant, and than they are in a desperate situation that needs urgent help, which usually costs them much more than if they would have planed things right. When you are thinking of getting a new roof for your house, chances are that you will not want to go at it alone. Not only is the construction dangerous, but it is hard to select the correct roofing materials and to construct it in a structurally-reliable manner.

There are, of course, advantages to getting a professional to do the roofing for you. The number one advantage of hiring a roofing contractor is that you will be able to get expert feedback on what materials you need, for both aesthetic and practical reasons. If you have any questions about damage to your roof, or anything to do with style, you will be able to speak with your roofing contractor. Another advantage of using a roofing contractor is that you are ensured of having the job done right the first time, there should be maximal efficiency to the roofing contractor work, allowing you minimal time of work on your house and the absolute minimum discomfort for you and your family while the work is being done.

Not only can they do what you request of them, but your roofing contractor may also be able to locate any problem areas that may be arising. This is very important because if you can get these areas repaired early on, you may be able to avoid a lot of damage to your home down the road. It is very important to get a roofing job done as professionally and as thoroughly as possible, since most people do not go about changing their roof every few years you may want to think of all the aspects of this project before you sign any agreement or buy any material.

Naturally you should find out if the contractor you are going to hire is the right person for the work so you may want to ask them for some references. The best way that this can be done is asking what other houses in your neighborhood that they have worked on, look at the work, listen to other peoples experience and that would make your decision easier. This way you can go by and see what the roof looks like, and also ask these people what they thought of the level of service that they received. By checking out potential contractors up front, you will be able to avoid running into problems after they have already started the job.

How To Select A Shower Enclosure to Help With Plumbing

These days you will discover a whole lot of options when it comes to shower enclosures which include the most hi-tech of modern-day design, that will make you shower enclosure a decoration of your bathroom.

It would be a place where you can unwind after a hard days work and stimulate both your mind and your body.

Modular Shower Enclosures

If you have still not decided about your choice of shower enclosure, you can think about selecting modular shower enclosures that can be easily fit inside a bathroom that is pressed for size. More significantly, such modular systems are great for not only dinky city apartments but also for sprawling bathrooms in big houses.

A lot of people looking to install shower enclosures in their homes are going for modular shower enclosures as they are affordable and available in a host of shapes, sizes, and designs.

General Tips for Checking Shower Enclosures

Shower enclosures are generally available in various shapes like oblong, rectangle, quadrant etc. The shape that you select must not take up a whole lot of space in the bathroom, in the sense that it must not look cramped. A shower enclosure must offer you comfortable space while showering and must also enable you to get a sense of space for your bathroom. A whole lot of preparatory work can be saved if the position of your shower enclosure is the same as your old shower. Otherwise it would mean, making changes to your bathroom as you will need to install new hot and cold water pipes as well as waste pipes.

The Testing of Shower Enclosures

Bad quality shower enclosures will be made up of materials that will corrode over time.  Most plumbers will be able to help you out with this. Only buy those shower enclosures which have gone through a stringent process of anti-corrosion salt tests. Not many people think about door rollers when buying shower enclosures, but high quality door rollers are essential for the extended longevity of shower enclosures. The shower enclosure that you purchase must go through a door runner test.

Also check your shower enclosure for water leakage. The best shower enclosures have a good seal with magnetic strips that enable the water be kept inside the shower. Also, make sure that the shower enclosure that you select has good door handles and fixings that are made up of high quality metal or any other material.

Tempered Glass Shower Enclosures

If you are going for shower enclosures made up of tempered glass then you must see to it that the glass is as thick as possible. The thicker the glass, the better the shower enclosure! Moreover, glass is liable to chip and thus cause injury. Hence it is of paramount importance that the glass shower enclosure has an edge protection. Glass enclosures with aluminum framing can be a good option. Tempered safety glass must meet the standards of safety that are lain down by various organizations.

A 120mm by 120mm glass piece should break into 45 pieces minimum, anything less than that would mean bigger shards of glass which will cause serious injuries.

Buying a shower enclosure is easy and the options in this regard are many and varied. All you need to do is select a shower enclosure that confirms to your requirements and the requirements of your bathroom. If your shower enclosure is cramped, then you might not enjoy it as much. So keep the height, width, safety requirements in mind before making your choice.

This article about showers was submitted by a representative at Jersey Home Renovations & Plumbing for Nutley, NJ.


What Do You You Need to Buy To Remodel Your Kitchen?

Have you recently decided to remodel your kitchen?  If so, have you decide what you would like to get done?

Whether you are only interested in changing your kitchen cabinets or if you want to remodel every inch of your kitchen, you will need supplies. The supplies that you need will all depend on the type of remodeling that you plan on doing. Despite the fact that your kitchen remodeling supplies will vary, you can commonly purchase them all from the same place.

As previously mentioned, the type of kitchen remodeling you plan on doing will have an impact on which supplies you will need. For example, if you are planning on replacing your kitchen cabinets, you will need to find new cabinets to install. The same can be said for kitchen flooring, lighting, and countertops.

If you need to purchase a fairly large number of kitchen remodeling supplies, say if you are planning on remodeling all or the majority of your kitchen, you may want to shop at one of your local home improvement stores.  Most home improvement stores have a fairly large selection of home remodeling supplies and materials, including laminate countertops, floor tiles, ceiling tiles, light fixtures, and cabinets.  Purchasing all of your remodeling supplies at once will help to save you time.

Although it may be a good idea to shop at one of your local home improvement stores, you may not want to.  If this is the case, you should examine the internet and what it has to offer. There are a number of online retailers that would be willing to deliver their kitchen remodeling supplies directly to your door.

In addition to traditional retailers, you can also find other individuals and companies who specialize in producing quality, customized products, such as kitchen cabinets.  Whether you can’t find what you are looking for locally or if you want to have something, such as your kitchen cabinets, custom designed, you are advised to look online.  A simple internet search should return the results that you were looking for.

When it comes to home improvement projects, it is important that you get the items or materials that you need, such as floor tiles or light fixtures, but you cannot complete a home improvement project without the right tools.  If you do have some home improvement experience, there is a good chance that you may already have most of the tools that you need.  If you need additional tools or if you don’t have any at all, you will need to purchase yourself some.

The tools that you need will all depend on the remodeling that you are doing, that is why it is a good idea to familiarize yourself with project instructions, as well as the tools that are needed before you get started.  If you are purchasing your remodeling materials from a home improvement store, it may be a good idea to save yourself an extra trip and buy your tools at the same time.

As the one in charge of remodeling, you can shop for materials, supplies, and tools wherever you want to.  Despite the fact that you have complete control over your kitchen remodeling project, as well as what is or isn’t being used, you may want to take the time to compare the prices of everything that you need to buy.  As long as you get the tools and materials that you need, it really shouldn’t matter, but why pay more money than you need to?

This article was submitted by Kitchen Cabs Direct.  You can check them out at http://www.kitchencabsdirect.com.

The Art of Hiring a Contractor

I will be submitting articles on hiring contractors to problem solving typical to not so typical home repairs and improvements homeowners typically come across. If you have questions please feel free to submit to this article and I will try to answer your questions. However, for today I would like to discuss Home improvement contractors. In a prior life, I was a home improvement contractor for a number of years and have experienced situations from the other side as a contractor. There are things that a homeowner can look for when hiring a contractor. These things are obvious. First, notice punctuality, Secondly, look at the vehicle that the contractor arrives in. Is it in disrepair? Think about it a contractor that cares about his business would invest in a vehicle that shows he is serious about business. Now I am not saying he has to show up in a 50,000.00-dollar vehicle. It should be presentable. Next, does he shake your hand when introducing himself? Ask questions, look for tell tale signs. References, a good contractor has a following. Is he licensed? Is he insured? Taking time to notice these things should help in your decision in hiring a home improvement contractor. Only you the homeowner can avoid hiring a wannabe contractor. NEXT: Tales from the Home improvement contractors point of view.

Need a good contractor?  I got my bathroom remodeler from Contractor Match.

How Does The Plumbing Inside a Septic Tank Work?

septic tank plumbingA sewerage drain field and a septic tank make up a small scale sewage treatment system. A septic tank is basically a rectangular shaped underground receptacle for wastewater. It is watertight, made of concrete, and consists of tanks that are divided into chambers. The first chamber has twice the volume as the second and the majority of the organic solid matter, referred to as sludge, gets settled here. The second chamber further purifies the wastewater.

The septic tank collects wastewater from toilets, showers, sinks, etc. Due to the absence of a current the sludge quickly settles down to the tank floor. Anaerobic bacterial digestive activity on the sludge leads to the generation of methane and carbon dioxide; the sludge is stabilized and does not rot anymore. Particles of stabilized sludge stay settled, some may float to the top as scum.

A septic tank should be constructed such that there is maximum contact time with the microorganisms so as to enable swifter digestion and plumbing of the sludge. This is achieved by placing the inlet, overflow, and outlet diagonal to each other and by making the streams flow in vertically placed plumbing pipes.

The semi-purified water moves to the second chamber via the overflows that are constructed such that the upward motion of water prevents larger particles from flowing into the second chamber. The feeding, digestion, and settlement of organic matter continues in the second chamber. The retention time in the second chamber is half that of the first chamber because of its size and the fact that the amount of organic matter to treat is less. The outlet is constructed in the diagonal corner to the overflow.

The treated wastewater is directed to a drain field, also known as a seepage field, where any impurities that still exist get decomposed naturally, the water is taken up by the plant root system or it may even become a part of the groundwater. The large sized drainage field is required if the soil is not very porous. A septic system can be made to work entirely by using gravitational forces; at some places, however, a pump may be required to overcome topographical limitations.

The rate of sludge generation in septic tanks is around 0.05 cubic yards every year for an individual. Septic tanks need to be emptied by a qualified plumber every few years so that there is enough reaction space for the microorganisms to attack the wastewater and for the sludge to settle.

The septic tank may be emptied by a fairfield New Jersey Plumber every 5-7 years depending upon the amount of wastewater it processes. The tank is emptied using an exhauster truck manned by trained personnel. The sludge that is sucked into the exhauster truck is released into public waste water treatment plants, sanitary landfills, or sludge drying beds.

Properly digested sludge can be used as a natural fertilizer; this is possible only if no fresh wastewater is added to the tank for at least one week.

The design of the septic tank should be such that the wastewater always flows in its designated path and no short circuits in the water flow occur. T-pipe-connectors with inflow and outflow openings under the water level should be used for inlet, overflow, and outlet pipes. This prevents the floating scum from clogging the pipes. A grease trap should be provided for the wastewater inflow pipe.

This article was submitted by Vinny from Jersey Home Renovations & Plumbing.